Menu
Cart 0

How to Install Bluetooth Control Cornhole Lights

How to install bluetooth cornhole lights is the one question that every cornholer should know the answer to. These are the only lights that require a smart phone so they need a little extra work, but the install is a breeze

We'll take you through the process step by step:

Step 1 - Install 8 AA batteries into the battery box

Step 2 - Connect the lights to the Bluetooth Receiver

Step 3 - Connect the Bluetooth Receiver to the battery box

Step 4 - Align the hole lights underneath the board so there is no overlap

Step 5 - Screw in the lights with the 4 screws supplied

 

Step 6 - Screw down the Bluetooth Receiver (Ensure no interference from leg swinging down)

Step 7 - Align the battery box to an (Ensure no interference from leg swinging down)

Step 8 - Remove sticky back and attach battery box

Step 9 - Remove the sticky back from the light and place it along the head board (be careful to not obstruct the legs from closing down)

Step 10 - Follow the link to install the App that controls the light-( ProGlowSports.com/LotusLanternCode )

Step 11 - Turn on lights.... Open App (Approve  Turn On Bluetooth)

Step 12 - Enjoy your Lights !!! 

For a more in-depth view, check out the video we made that covers this plus much more. https://youtu.be/YmTxZ04b7Is

If you like them as much as we do, you can pick up a set of your own below. You can also see more videos featuring these light.